Ningyuan Fastener
Ningyuan Fastener
Precision engineering components deployed across Israel's municipal water systems, utility galleries, and architectural installations.
Israel is geographically positioned along the active Dead Sea Transform (DST) rift system (often referred to as the Jordan Rift Valley), stretching from the Red Sea up to Turkey. Geological history and modern risk models point to a significant likelihood of moderate-to-severe seismic activities within our lifetime. For structural engineers, MEP contractors, and project managers in metropolitan areas like Tel Aviv, Haifa, and Jerusalem, structural resilience is not merely a theoretical concern—it is a vital legislative and life-safety mandate.
During a seismic event, non-structural components—such as heating, ventilation, air conditioning (HVAC) systems, electrical raceways, water supply networks, and gas pipelines—are highly vulnerable to failure. The catastrophic failure of these systems can lead to extensive water damage, hazardous gas leaks, fire outbreaks, and obstructed evacuation routes, even if the primary structural concrete framework remains standing.
Handan Ningyuan Fastener Manufacturing Co., Ltd. delivers engineered, high-ductility seismic support accessories and anchoring components specifically designed to absorb dynamic energy, maintain structural integration, and satisfy the rigorous regulatory requirements of the modern Israeli construction sector.
All mechanical, electrical, and plumbing installations in Israel must adhere to Israel Standard SI 413 (Design provisions for earthquake resistance of structures). This standard dictates the calculations of seismic forces acting on non-structural elements and specifies the load ratings for supports and connections.
Our seismic accessories are manufacturing-tested to match or exceed equivalent Eurocode 8 (EN 1998) and ASCE 7 specifications, ensuring seamless integration into SI 413 compliant engineering designs.
Meeting the demands of Tier-1 contractors in Tel Aviv, Haifa, and Ashdod with certified corrosion resistance and ductility.
Israel's coastal proximity (Tel Aviv, Haifa, Ashdod) poses high-salinity challenges. We offer Hot-Dip Galvanization (HDG) conforming to ISO 1461, ensuring maximum corrosion resistance in humid, maritime C4 and C5 environments.
Seismic fittings must yield under seismic stress without sudden brittle fracture. We utilize high-strength, carbon steel alloys subjected to precise heat treatments, guaranteeing minimum elongation rates required for dynamic energy dissipation.
Certified under ISO 9001 and rigorously tested in compliance with global standards, including RoHS EU environmental regulations and automotive-grade banned substance controls (GB/T30512, 2000/53/EC ELV).
Handan Ningyuan Fastener Manufacturing Co., Ltd. (formerly Jin Langtao), founded in 2005, is located in Handan Yongnian, the renowned fastener capital of China. For over 18 years, the company has grown from a high-end fastener workshop into a massive, modern manufacturing enterprise spanning a 20,000 square meter facility.
Today, we house a professional R&D team, dedicated quality inspectors, and over 50 advanced multi-station cold heading and stamping machinery. We provide integrated solutions covering high-end fastener standard parts, building electromechanical seismic systems, photovoltaic (PV) solar mounting frameworks, and pipe gallery integrated support brackets.
By serving both domestic heavy industries and international construction markets (including Israel, Europe, Southeast Asia, and South America), Ningyuan continues to innovate to meet safety-critical structural support challenges.
Inquire About Our FacilitiesHow our seismic support accessories secure high-value critical assets and systems across key Israeli sectors.
Microchip manufacturing and biotechnology plants in Israel require absolute micro-vibration control and foolproof seismic bracing for gas lines, pure water piping, and HVAC ducting. The failure of even a single support can halt multi-million-dollar production lines. Our lightweight, rigid steel channels and anchor assemblies ensure maximum stability under structural shocks.
Providing clean water is critical in Israel. Desalination infrastructure routes heavy, high-pressure salt water through large piping systems. To withstand the combination of high hydraulic loads, coastal salinity, and potential ground tremors, contractors utilize our Hot-Dip Galvanized C-channels, heavy beam clamps, and reinforced T-connectors.
The skyline of central Israel is rapidly densifying with high-rise commercial structures. In high-rise buildings, upper-level seismic acceleration is significantly amplified. Our AB-type seismic hinge connectors, V-shaped reinforcement rib assemblies, and specialized concrete wedge anchor expansion bolts keep vertical MEP shafts anchored securely.
Browse our selection of specialized mounting hardware, concrete anchor systems, and cold-formed structural profiles.
In addition to seismic bracing components, we manufacture a wide range of standard high-strength fasteners and customized metal solutions.
Hexagonal flanges with washers and drilled tail screws, Cross groove pan head self drilling screws, Concrete wedge anchor expansion bolts, Hexagonal Drill Tail Screws, Hexagon bolts, Flat iron hoop, and Truss head self drilling screws.
C-shaped steel, U-shaped steel, H-rail, sink, square pipe, press blocks, photovoltaic piles, hot-dip galvanized triangle brackets, bases, pressure plates, embedded plates, and integrated pipe gallery support systems.
Hot-dip galvanized bolts, hot-dip galvanized nuts, high-strength threaded inserts, dry wall nails, Tiger's clips, and hexagon connecting nuts designed for building electromechanical and seismic installations.
Our services extend beyond manufacturing to include dedicated logistical and engineering support.
Focused on thread inserts, fasteners, and seismic accessories for over 20 years, with an annual output exceeding 60 million pieces. Backed by 25+ patents and municipal research recognition.
Our facility has passed quality standards audits including ISO9001 quality system, weapons & equipment systems, EU RoHS compliance, and 2000/53/EC ELV testing protocols.
To help engineers confirm tolerances, thread pitches, and surface treatments, we offer free samples of our standard catalog products to qualified projects in Israel.
Our experienced technicians provide design calculations for fastener load ratings and installation guidance for seismic supports in high-rise buildings and utility galleries.
Answers to key technical questions from engineers and procurement managers operating in the Israeli construction sector.
Israel Standard SI 413 regulates the seismic safety design of structural and non-structural components (MEP systems). Our accessories, such as C-shaped steel channels, AB-type hinge connectors, and concrete wedge anchors, are designed with the high load capacities and ductility required to meet SI 413 calculation models for seismic force transmission. We provide raw material mill sheets and tensile testing data to assist structural engineers with compliance reviews.
For coastal applications located within 5 kilometers of the Mediterranean Sea (high humidity and salinity), we recommend our Hot-Dip Galvanized (HDG) coating conforming to ISO 1461. This coating provides a thick layer of zinc-iron alloy that protects the underlying carbon steel from corrosion in aggressive C4 or C5 environments.
Yes. Cleanroom piping and MEP support systems must meet strict particulate cleanliness standards while maintaining high structural rigidity. We offer electro-galvanized or stainless steel options (such as Grade 316) that prevent chemical reactions and rusting, meeting cleanroom class requirements without releasing loose metallic dust.
Our materials are tested under dynamic stress models. We verify structural properties, yield strength, tensile limits, and impact toughness at our municipal-grade testing lab. We also verify conformity to GB/T30512, ISO 9001, and CE standards when required, ensuring each batch meets safety tolerances before shipment.
For standard catalog sizes (such as standard hex nuts, C-shaped channels, and wedge anchors), we maintain a regular inventory for immediate dispatch. For customized OEM designs requiring custom tooling, typical factory production ranges from 15 to 30 days, followed by standard sea freight transit to Haifa or Ashdod port.
Yes, we provide dimensional drawings and material specifications for our full range of seismic components. This information can be integrated into BIM designs (such as Revit) to model the layout of seismic braces and verify load paths for local approvals.
